NLS Power
Ductwork & Accessories

Ductwork & Accessories

Ductwork and accessories carry conditioned air from air handling units and fans to diffusers and grilles, including dampers, silencers, flexible connections, and fire/smoke dampers at compartment boundaries. NLS sources galvanized steel and pre-insulated ductwork with the full accessory range for hospital, commercial, and industrial HVAC installations across Saudi Arabia.

Ductwork carries air from the point it's conditioned to the point it's delivered, and the accessories along that path do the actual work of controlling flow, sealing off fire compartments, and cutting noise transmission, which makes them as important to a working HVAC system as the AHU or fan itself. Galvanized steel duct is the standard construction for most commercial and industrial runs, fabricated to the sheet thickness and joint type the airflow and static pressure class require. Pre-insulated panel duct, built from a rigid insulation core with foil facing, skips the separate external lagging step and suits applications where installation speed or a cleaner finished appearance in an exposed ceiling matters.

Fire and smoke dampers sit at every point ductwork crosses a fire-rated wall or floor, closing automatically on a fusible link or a fire alarm signal to stop fire and smoke moving through the duct network from one compartment to another; a building's fire compartmentation strategy is only as good as the dampers protecting its duct penetrations, and every one of them needs a fire rating matched to the wall or floor it passes through. Volume control dampers and balancing dampers let a commissioning engineer set the actual airflow at each branch and outlet to match the design figure, a step every ducted system needs regardless of how well the AHU and duct sizing were calculated on paper. Flexible duct connections isolate fan vibration from the rigid ductwork network, and duct silencers cut fan and airflow noise on runs serving noise-sensitive spaces like hospital wards, hotel guest rooms, and offices.

Saudi hospital projects specify fire and smoke damper locations and ratings against the building's fire strategy drawings, and getting the damper schedule wrong, whether missing a required location or specifying the wrong rating, is a common source of fire-inspection findings at handover. Dust loading in outdoor air also plays into ductwork accessory selection: access panels for filter and coil cleaning, and dampers that won't seize from dust accumulation, matter more on a Saudi installation than in cleaner-air climates.

Sourcing runs from a ductwork layout and accessory schedule. A project's mechanical contractor or consultant issues duct sizes, construction class, and a schedule of dampers, silencers, and access points by location, and NLS returns a priced quote in USD covering the ductwork and accessory package, with lead time set by total duct area and whether fire-rated dampers requiring third-party certification are included.

Specifications

  • ✓Construction: galvanized steel sheet duct or pre-insulated rigid panel duct
  • ✓Fire/smoke dampers rated to match the fire-resistance rating of the wall or floor they penetrate
  • ✓Volume control and balancing dampers for commissioning airflow to design figures at each outlet
  • ✓Flexible connections for fan vibration isolation, duct silencers for noise-sensitive spaces
  • ✓Access panels included at filter, coil, and damper locations for maintenance
  • ✓Standards referenced: SMACNA or equivalent duct construction class per project static pressure rating

Frequently Asked Questions

Who supplies ductwork and fire dampers in Saudi Arabia?+

NLS sources galvanized steel and pre-insulated ductwork along with the full accessory range, fire and smoke dampers, volume dampers, silencers, and flexible connections, for hospital, commercial, and industrial HVAC installations across Saudi Arabia.

Why do fire dampers matter on a hospital ductwork installation?+

Every point ductwork crosses a fire-rated wall or floor needs a damper rated to match that compartment's fire rating, since the duct penetration is otherwise a gap in the building's fire compartmentation strategy. A missing or wrongly rated damper is a common finding at fire inspection.

What lead time should I expect for a ductwork and accessories package in KSA?+

Lead time depends on total duct area and whether fire-rated dampers requiring third-party certification are part of the order. NLS confirms the figure once the layout and accessory schedule are set.

Related products

HVAC Control Systems

HVAC Control Systems

HVAC control systems (BMS/DDC) monitor and adjust chillers, AHUs, fans, and FCUs to maintain setpoints while minimizing run time and energy draw. NLS sources DDC controllers, sensors, and BMS front-end software for hospital, hotel, and commercial buildings across Saudi Arabia, scoped to the points list and sequence of operations each project's mechanical design specifies.

Precision Cooling Units

Precision Cooling Units

Precision cooling units hold tight temperature and humidity tolerances for data centre, telecom, and control room environments, running continuously with tighter control bands than comfort cooling AHUs. NLS sources CRAC and CRAH precision units in N+1 redundant configurations, sized to server rack heat density, for data centre and critical-facility projects across Saudi Arabia.

VRF Systems

VRF Systems

VRF (variable refrigerant flow) systems run one outdoor condensing unit against multiple indoor units, each modulating its own refrigerant flow to match zone load independently. NLS sources VRF systems sized for the Saudi 50°C design ambient, for office towers, hotels, and mixed-use buildings where zone-by-zone control and cooling capacity retention matter more than a single central chiller plant.

Air Handling Units

Air Handling Units

Air handling units (AHUs) condition, filter, and circulate air for a building's ductwork network, built around a fan, coil, and filter bank inside a common casing. NLS sources AHUs sized for Saudi outdoor air conditions, with filtration stages matched to hospital and clean-environment air-change requirements, for hospital, hotel, and commercial building projects across the Kingdom.

Chillers

Chillers

Chillers produce chilled water that circulates through a building's air handling units and fan coils, using either an air-cooled or water-cooled condenser. NLS sources air-cooled and water-cooled chillers derated for the Saudi 50°C design ambient, sized in refrigeration tons, for hospital, hotel, and large commercial cooling plants across the Kingdom.

Fan Coil Units

Fan Coil Units

Fan coil units (FCUs) draw room air across a chilled or hot water coil and a fan to condition individual rooms or zones, fed from a central chiller or boiler plant. NLS sources ducted, ceiling-concealed, cassette, and vertical FCU types for hotel, hospital, and residential-tower projects across Saudi Arabia, sized to the room load and duct or free-blow layout each project specifies.

Available in

Get in touch

Send us your RFQ

Tell us what you need and we will come back with pricing and lead times.

+966 53 590 8101