
Gas Generators
Gas generators burn natural gas or LPG instead of diesel to drive an AC alternator, suited to continuous or prime duty wherever a gas supply already reaches the site. NLS sources gas generator sets from 20kVA to 2000kVA for industrial and commercial projects across Saudi Arabia, rated to ISO 8528, with lower fuel-storage overhead than an equivalent diesel set.
A gas generator set runs a spark-ignition or dual-fuel engine on natural gas, LPG, or biogas instead of diesel, driving the same type of AC alternator used on a diesel set. Where a site already sits on a gas network or has an LPG bulk supply, a gas genset removes the ongoing diesel delivery and on-site fuel storage that a diesel set needs, and it burns cleaner, which matters where a project has an emissions limit to meet. ISO 8528 covers the rating basis for gas sets the same way it does diesel: prime rating for variable, unlimited-hours load, and standby rating for utility-outage backup duty at a higher but time-limited output.
NLS sources gas generator sets from roughly 20kVA to 2000kVA, matched to pipeline natural gas or LPG bulk supply, with control panels built for grid-parallel operation where a project wants to run the set alongside utility power rather than only during an outage. Engine and alternator combinations are sized against the gas supply pressure and calorific value available on site, since a genset rated on pipeline gas doesn't perform the same way on a lower-calorific LPG mix without derating.
On Saudi sites, gas gensets show up on industrial plants and process facilities with an existing gas connection, on continuous prime power duty in remote locations where LPG delivery is more practical than diesel resupply, and on projects with a stated emissions target that a diesel set would struggle to hit. Ambient derating applies the same way it does to diesel sets: Saudi summer temperatures push both engine and alternator output below the standard 40°C-ambient plate rating, so NLS sizes against actual site conditions rather than the catalog number.
Sourcing follows the same path as NLS's other generator categories: send gas type and supply pressure, connected load, and prime or standby duty class, and NLS returns a priced quote in USD with delivery lead time based on engine and alternator stock. Dual-fuel sets that can run on diesel as a backup fuel typically carry a longer lead time than single-fuel gas units.
Specifications
- ✓Rated to ISO 8528-1 as prime power (continuous variable load) or standby power (utility-outage backup)
- ✓kVA range: approximately 20kVA to 2000kVA, natural gas (pipeline) or LPG fuel
- ✓Configurable for island (standalone) or grid-parallel operation
- ✓Alternator output to IEC 60034; engine sized against gas supply pressure and calorific value
- ✓Ambient derating applied for Saudi design temperature and altitude
- ✓Lower on-site fuel storage requirement than an equivalent diesel set
- ✓Configurable for emergency standby, continuous prime power, peak shaving or combined heat and power (CHP)
Frequently Asked Questions
Is a gas generator cheaper to run than a diesel generator in Saudi Arabia?+
Running cost depends on the delivered price of gas against diesel at the site, but a gas set generally carries a lower fuel-handling cost since it skips the diesel delivery and on-site storage a diesel set needs. Where a site already sits on a gas connection, that fuel-logistics saving is usually the deciding factor over diesel.
Who supplies gas generators for industrial projects in Saudi Arabia?+
NLS sources and supplies gas generator sets from 20kVA to 2000kVA for industrial and commercial projects across Saudi Arabia, matched to pipeline gas or LPG supply and priced in USD against a project's load schedule.
Can a gas generator run in parallel with the utility grid?+
Yes, when the control panel and protection relay are specified for grid-parallel operation. That configuration lets a facility run the gas set alongside utility power for peak shaving or continuous prime duty, rather than only switching over during an outage.
Related products

Portable Generators
Portable generators are small, mobile diesel or petrol units that supply power on site without a fixed installation, typically single or three phase up to around 20kVA. NLS sources portable generator sets for construction sites, temporary events, and remote maintenance work across Saudi Arabia, priced in USD, with output sized to the load a site actually needs.

Automatic Transfer Switches
An automatic transfer switch (ATS) detects a utility power failure and switches the electrical load to a standby generator without manual intervention, then switches back once utility power is stable. NLS sources ATS panels from 100A to 4000A for hospital, commercial, and industrial projects across Saudi Arabia, built to IEC 60947-6-1 and sized to NFPA 110 transfer-time requirements where emergency power applies.

Synchronizing Panels
A synchronizing panel matches voltage, frequency, and phase angle between two or more generators, or between a generator and the utility grid, before closing the breaker to run them together. NLS sources synchronizing panels for multi-set generator plants and N+1 redundant power systems across Saudi Arabia, sized to the number of sets and paralleling scheme a project needs.

Generator Control Panels
A generator control panel monitors and manages a genset's engine and alternator, handling auto-start on utility failure, run-time protection, and shutdown on fault conditions like low oil pressure or overspeed. NLS sources generator control panels for new installations and control-panel retrofits across Saudi Arabia, with remote monitoring and BMS integration available where a project specifies it.

Fuel Tanks & Day Tanks
Fuel tanks and day tanks store diesel for a standby generator, either as bulk storage sized for a project's full autonomy requirement or as a smaller day tank feeding the engine directly. NLS sources bunded bulk tanks and day tanks built to NFPA 30/31 for hospital, industrial, and commercial standby power projects across Saudi Arabia.

Generator Acoustic Enclosures
A generator acoustic enclosure wraps a genset in sound-attenuating panels to bring noise down to a level a site's noise limit allows, typically expressed in dB(A) measured at a set distance from the unit. NLS sources acoustic enclosures for diesel and gas generator sets across Saudi Arabia, sized to meet the noise limit a project's location and nearby occupied buildings require.
