NLS Power
Flood Lighting

Flood Lighting

Flood lights throw a wide, directable beam over an open area, a facade, a security perimeter, or a stadium field, from a wall, pole, or ground mount rather than a fixed grid overhead. NLS sources LED flood lights built to IEC 60598 with IP66 housings and glare-control options, for security, facade, and outdoor facility lighting on projects across Saudi Arabia.

Flood lighting differs from a street or high mast layout in that it aims a wide, adjustable beam at a defined target area, a building facade, a security perimeter fence line, a sports field, or a construction laydown yard, from a smaller number of mounting points rather than a spaced pole grid. The fixture's beam angle (narrow, medium, or wide) and its aiming bracket matter as much as its wattage, since a flood light aimed poorly wastes output as sky glow or light trespass onto a neighboring property rather than putting lumens where they're needed.

LED flood lights, built to IEC 60598, have replaced metal halide flood fixtures across most new installations for the same reasons they've displaced metal halide elsewhere: instant-on operation, lower running cost at a comparable output, and a longer service life before the fixture needs replacing rather than just re-lamping. Glare control matters more on flood lighting than most other outdoor categories, since a flood light often sits at eye level or points toward a road, walkway, or occupied space, and an anti-glare louvre or asymmetric beam design keeps the fixture from becoming a hazard to drivers or pedestrians in its field of view.

Saudi applications span security perimeter lighting on industrial and logistics sites, facade lighting on commercial and hospitality buildings, sports facility and stadium lighting, and general area lighting on construction sites and laydown yards where a project needs illumination fast without a full pole and foundation installation. IP66-rated housings are standard given dust exposure, and higher-wattage units generally need a heat sink design checked against Saudi ambient rather than a temperate-climate datasheet rating.

A project team typically sends the target area dimensions, mounting height and distance from the target, and required lux level, and NLS returns a beam angle and wattage recommendation with a USD quote. Standard wattage tiers in common beam angles generally source faster than a fixture built to a specific photometric study.

Specifications

  • ✓Beam angles: narrow, medium, and wide, with adjustable aiming bracket for target-specific mounting
  • ✓Luminaire safety to IEC 60598, IP66-rated housing standard for outdoor exposure
  • ✓Anti-glare louvre or asymmetric beam options for fixtures near roads, walkways, or occupied spaces
  • ✓Typical use: security perimeters, facade lighting, sports facilities, construction site and laydown yard lighting
  • ✓LED source for instant-on operation and lower running cost versus metal halide flood fixtures
  • ✓Heat sink design checked against Saudi ambient temperature for higher-wattage units

Frequently Asked Questions

What beam angle do I need for a flood light?+

Beam angle depends on mounting height and distance to the target area: a narrow beam suits a tall pole aimed at a distant target, while a wide beam suits a shorter mount lighting a nearby wall or yard. NLS recommends an angle once mounting height and target distance are known.

Who supplies LED flood lights for security and facade lighting in Saudi Arabia?+

NLS sources and supplies LED flood lights built to IEC 60598 with IP66 housings and glare-control options, for security perimeter, facade, and outdoor facility lighting on projects across Saudi Arabia.

How do I stop a flood light from causing glare toward a road or walkway?+

An anti-glare louvre attachment or an asymmetric beam optic redirects light onto the target area while cutting the direct glare a driver or pedestrian would otherwise see, and the aiming angle itself needs checking so the beam doesn't point directly into a sightline.

Related products

Explosion-Proof Lighting

Explosion-Proof Lighting

Explosion-proof lighting is built and certified to prevent an internal spark or hot surface from igniting a surrounding flammable atmosphere, classified by hazardous zone rather than sold as a generic rugged fixture. NLS sources ATEX and IECEx-certified LED fixtures for Zone 1/2 and Zone 21/22 areas, matched to the gas or dust group a Saudi plant's hazardous area classification specifies.

Lighting Control Systems

Lighting Control Systems

Lighting control systems switch, dim, and schedule fixtures automatically through protocols like DALI or 0-10V analog dimming, rather than leaving every circuit on a simple manual switch. NLS sources DALI-ready drivers, dimming panels, and occupancy/daylight sensors built to IEC 62386, for facility and street lighting projects across Saudi Arabia looking to cut energy use and centralize control.

Solar Street Lighting

Solar Street Lighting

Solar street lights combine an LED fixture, solar panel, battery, and controller into a self-contained pole unit that needs no grid connection or trenched cable, suited to roads and paths without nearby power infrastructure. NLS sources and supplies all-in-one and split-type solar street lighting sized for Saudi solar irradiance and summer autonomy needs, as a capability alongside its grid-powered lighting range.

Obstruction Lighting

Obstruction Lighting

Obstruction lighting marks tall structures, towers, cranes and buildings that penetrate airspace so aircraft can see and avoid them at night and in low visibility. NLS supplies LED low, medium and high intensity obstruction lights built to ICAO Annex 14 and FAA AC 150/5345-43 for GACA-regulated structures across Saudi Arabia, and this is one of the company's core specialisms.

Hazardous Area Lighting

Hazardous Area Lighting

Hazardous area lighting provides safe, reliable illumination in environments where flammable gases, vapors, dusts, or fibers are present. These specialized fixtures are engineered to prevent ignition and ensure operational safety, complying with strict international and local standards. NLS Power supplies a wide range of hazardous area lighting solutions for diverse industrial applications across Saudi Arabia.

Airfield Ground Lighting

Airfield Ground Lighting

Airfield ground lighting (AGL) covers the runway, taxiway, and apron fixtures, edge lights, threshold lights, PAPI approach slope indicators, that guide pilots during taxi, takeoff, and landing in darkness or low visibility. NLS has supplied AGL fixtures built to ICAO Annex 14 and GACA airfield lighting standards for Saudi airbase and heliport projects, a core specialism of the company.

Guides

Available in

Get in touch

Send us your RFQ

Tell us what you need and we will come back with pricing and lead times.

+966 53 590 8101