
Solar Street Lighting
Solar street lights combine an LED fixture, solar panel, battery, and controller into a self-contained pole unit that needs no grid connection or trenched cable, suited to roads and paths without nearby power infrastructure. NLS sources and supplies all-in-one and split-type solar street lighting sized for Saudi solar irradiance and summer autonomy needs, as a capability alongside its grid-powered lighting range.
Solar street lighting packages an LED luminaire, a photovoltaic panel, a rechargeable battery, and a charge controller onto a single pole, sized so the unit runs through the night on stored solar energy without a grid connection or a trenched supply cable back to a distribution board. Two configurations dominate the market: all-in-one units where the panel, battery, and LED are integrated into one compact head, and split-type units where the battery sits in the pole base and the panel mounts separately at the top, generally chosen when a larger battery capacity or longer autonomy is needed than an all-in-one head can hold.
Sizing a solar street light for Saudi Arabia starts from the site's solar irradiance data and the required autonomy, how many consecutive cloudy or dusty days the system must run through on stored charge without a full recharge, rather than a single generic wattage figure. Saudi solar resource is strong for most of the year, but dust accumulation on the panel surface cuts effective charging output measurably if cleaning isn't part of the maintenance plan, and summer ambient heat affects battery life and charge efficiency, particularly for lead-acid batteries, which is why LiFePO4 lithium battery chemistry has become the common choice for its better high-temperature tolerance and longer cycle life over older battery types.
This is a genuine supply capability rather than a project NLS has already delivered: NLS sources and supplies both all-in-one and split-type solar street lighting systems, sized against a project's solar data and required autonomy, for roads, walking paths, and perimeter routes that sit outside grid reach or where trenching a supply cable isn't practical, alongside the grid-powered street lighting range NLS also supplies.
A project team typically sends the mounting height, target lux level, and required autonomy days, along with the site's general solar exposure and dust conditions, and NLS returns a sized system recommendation. Battery chemistry and capacity, not the LED fixture itself, tend to be the main driver of both system cost and lead time on a solar street lighting order.
Specifications
- ✓Configurations: all-in-one (panel, battery, LED integrated in one head) or split-type (separate panel and pole-base battery)
- ✓Battery chemistry: LiFePO4 lithium standard for high-temperature tolerance and cycle life over lead-acid
- ✓Sizing driven by site solar irradiance data and required autonomy (consecutive low-sun days without recharge)
- ✓LED luminaire safety and photometric performance to IEC 60598
- ✓Panel and controller performance referenced against IEC 62109 for PV system safety
- ✓Dust-cleaning maintenance interval affects effective charging output and should be built into the site's maintenance plan
Frequently Asked Questions
What's the difference between all-in-one and split-type solar street lights?+
All-in-one units integrate the panel, battery, and LED into a single compact head, simpler to install. Split-type units mount the panel separately and house a larger battery in the pole base, generally chosen when a project needs more autonomy days or a bigger battery than an all-in-one head can hold.
Does dust affect solar street light performance in Saudi Arabia?+
Yes, measurably. Dust accumulation on the panel surface reduces effective charging output over time, so a cleaning interval needs to be part of the maintenance plan rather than assuming the panel performs at its rated output year-round without upkeep.
Who supplies solar street lighting in Saudi Arabia?+
NLS sources and supplies all-in-one and split-type solar street lighting systems sized against site solar data and required autonomy, for roads and paths outside grid reach, alongside the grid-powered street lighting range NLS also supplies across Saudi Arabia.
Related products

Obstruction Lighting
Obstruction lighting marks tall structures, towers, cranes and buildings that penetrate airspace so aircraft can see and avoid them at night and in low visibility. NLS supplies LED low, medium and high intensity obstruction lights built to ICAO Annex 14 and FAA AC 150/5345-43 for GACA-regulated structures across Saudi Arabia, and this is one of the company's core specialisms.

Hazardous Area Lighting
Hazardous area lighting provides safe, reliable illumination in environments where flammable gases, vapors, dusts, or fibers are present. These specialized fixtures are engineered to prevent ignition and ensure operational safety, complying with strict international and local standards. NLS Power supplies a wide range of hazardous area lighting solutions for diverse industrial applications across Saudi Arabia.

Airfield Ground Lighting
Airfield ground lighting (AGL) covers the runway, taxiway, and apron fixtures, edge lights, threshold lights, PAPI approach slope indicators, that guide pilots during taxi, takeoff, and landing in darkness or low visibility. NLS has supplied AGL fixtures built to ICAO Annex 14 and GACA airfield lighting standards for Saudi airbase and heliport projects, a core specialism of the company.

High Mast Lighting
High mast lighting mounts multiple floodlights on a pole from about 15 to 40 meters, on a lowering winch head, to light large open areas, highway interchanges, ports, rail yards, and industrial yards, from a few tall structures instead of many short poles. NLS sources high mast systems built to IEC 60598 and matched to Saudi wind-load requirements.

Industrial High Bay Lighting
High bay LED fixtures light warehouses, factories, and workshops with ceiling heights above roughly 6 meters, replacing older metal halide and fluorescent high bay units with a fixture that draws less power and starts instantly. NLS sources high bay LED lighting rated for Saudi ambient heat, built to IEC 60598, for industrial and logistics sites across the Kingdom.

Street Lighting
Street lighting fixtures mount on 6 to 12 meter poles to light roads, residential streets, and pedestrian routes to a defined lux and uniformity level, generally LED units now displacing high pressure sodium across new Saudi road projects. NLS sources LED street lighting built to IEC 60598 and photometric classes matched to road category, for contractors and municipal-linked projects across the Kingdom.
Guides
Powering Saudi Arabia's Future: Grid Modernization & Renewables
Saudi Arabia's Vision 2030 demands advanced electrical grids for modernization and renewable integration. NLS Power offers solutions for a resilient energy future.
Obstruction Lighting Compliance for Tall Structures and Cranes in Saudi Arabia
When obstacle lighting is required in Saudi Arabia, how intensity class is chosen, what an aeronautical study determines, and how ICAO Annex 14 is applied through GACA for towers, tall structures, and cranes.
